Br5181>admin(network.wan.nat)> add, Br5181>admin(network.wan.nat)> delete – Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 240
226
Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
1
157.235.91.2
2
10.1.1.1
For an overview of the NAT options available using the applet (GUI), see
Address Translation (NAT) settings”
BR5181>admin(network.wan.nat)> add
Description
Adds NAT entries.
Syntax
Example
admin(network.wan.nat)>add 1 indoors udp 20 29 10.10.2.2
admin(network.wan.nat)>list 1
-----------------------------------------------------------------------------
index
name
prot
start port
end port
internal ip
translation
port
-----------------------------------------------------------------------------
1
indoor udp
20
29
10.10.2.2
0
Related Commands
For an overview of the NAT options available using the applet (GUI), see
Address Translation (NAT) settings”
BR5181>admin(network.wan.nat)> delete
Description
Deletes NAT entries.
add
<idx>
<name>
<tran>
<port1>
<port2>
<ip>
<dst_port>
Sets an inbound network address translation (NAT) for WAN address <idx>, where <name> is the name of
the entry (1 to 7 characters), <tran> is the transport protocol (one of tcp, udp, icmp, ah, esp, gre, or all),
<port1> is the starting port number in a port range, <port2> is the ending port number in a port range,
<ip> is the internal IP address, and <dst_port> is the (optional) internal translation port.
delete
Deletes one of the inbound NAT entries from the list.
list
Displays the list of inbound NAT entries.