Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 292)

278 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
Syntax
BR5181>admin(network.wireless.rogue-ap.Client-scan)> start
Description
Initiates an Client scan for a user provided MAC address.
Syntax
For information on configuring the Rogue AP options available to the access point using the applet
(GUI), see
“Configuring rogue AP detection” on page 162.
BR5181>admin(network.wireless.rogue-ap.Client-scan)> show
Description
Displays the results of an Client scan.
Syntax
For information on configuring the Rogue AP options available to the access point using the applet
(GUI), see
“Configuring rogue AP detection” on page 162.
BR5181>admin(network.wireless.rogue-ap.allowed-list)>
Description
Displays the Rogue-AP allowed-list submenu.
add Add all or just one scan result to Allowed AP list.
show Displays all APs located by the Client scan.
start Initiates scan immediately by the Client.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
start <Client-mac> Initiates Client scan from user provided MAC address.
show Displays all APs located by the Client scan.
show Displays the rogue AP allowed list
add Adds an AP MAC address and ESSID to the allowed list.
delete Deletes an entry or all entries from the allowed list.