Br5181>admin(network.wan.vpn)> reset, Br5181>admin(network.wan.vpn)> stats – Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 247
Brocade Mobility 5181 Access Point Product Reference Guide
233
53-1002516-01
Network Commands
8
--------------------------------------------------------------------------
Name
: SJSharkey
Local Subnet
: 1
Tunnel Type
: Manual
Remote IP
: 206.107.22.45
Remote IP Mask
: 255.255.255.224
Remote Security Gateway : 206.107.22.2
Local Security Gateway
: 209.239.160.55
AH Algorithm
: None
Encryption Type
: ESP
Encryption Algorithm
: DES
ESP Inbound SPI
: 0x00000100
ESP Outbound SPI
: 0x00000100
For information on displaying VPN information using the applet (GUI), see
BR5181>admin(network.wan.vpn)> reset
Description
Resets all of the Mobility 5181 Access Point’s VPN tunnels.
Syntax
Example
admin(network.wan.vpn)>reset
VPN tunnels reset.
admin(network.wan.vpn)>
For information on configuring VPN using the applet (GUI), see
BR5181>admin(network.wan.vpn)> stats
Description
Lists statistics for all active tunnels.
Syntax
Example
admin(network.wan.vpn)>stats
-----------------------------------------------------------------------------
Tunnel Name
Status
SPI(OUT/IN)
Life Time
Bytes(Tx/Rx)
reset
Resets all VPN tunnel states.
stats
Display statistics for all VPN tunnels.