Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 290)

276 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
Network Rogue-AP Commands
BR5181>admin(network.wireless.rogue-ap)>
Description
Displays the Rogue AP submenu. The items available under this command include:
BR5181>admin(network.wireless.rogue-ap)> show
Description
Displays the current Mobility 5181 Access Point Rogue AP detection configuration.
Syntax
Example
admin(network.wireless.rogue-ap)>show
Client Scan : disable
Client Scan Interval : 60 minutes
On-Channel : disable
Detector Radio Scan : enable
Auto Authorize Brocade APs : disable
Approved APs age out : 0 minutes
Rogue APs age out : 0 minutes
For information on configuring the Rogue AP options available to the access point using the applet
(GUI), see
“Configuring rogue AP detection” on page 162.
show Displays the current Mobility 5181 Access Point Rogue AP detection configuration.
set Defines the Rogue AP detection method.
Client-scan Goes to the Rogue AP Client-uscan submenu.
allowed-list Goes to the Rogue AP Allowed List submenu.
active-list Goes the Rogue AP Active List submenu.
rogue-list Goes the Rogue AP List submenu.
.. Goes to the parent menu.
/ Goes to the root menu.
save Saves the configuration to system flash.
quit Quits the CLI.
show Displays the current Mobility 5181 Access Point Rogue AP detection configuration.