Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 237)

Brocade Mobility 5181 Access Point Product Reference Guide 223
53-1002516-01
Network Commands
8
Example
admin(network.wan)>
admin(network.wan)>set dhcp disable
admin(network.wan)>set ipadr 157.169.22.5
admin(network.wan)>set dgw 157.169.22.1
admin(network.wan)>set dns 1 157.169.22.2
admin(network.wan)>set auto-negotiation disable
admin(network.wan)>set speed 10M
admin(network.wan)>set duplex half
admin(network.wan)>set mask 255.255.255.000
admin(network.wan)>set pppoe mode enable
admin(network.wan)>set pppoe type chap
admin(network.wan)>set pppoe user jk
admin(network.wan)>set pppoe passwd @#$goodpassword%$#
admin(network.wan)>set pppoe ka enable
admin(network.wan)>set pppoe idle 600
For an overview of the WAN configuration options available using the applet (GUI), see “Configuring
WAN settings” on page 101.
pppo
e mode enable/d
isable Enables or disables PPPoE.
user <name> Sets PPPoE user name.
passwd <passwo
rd> Defines the PPPoE password.
ka enable/d
isable Enables or disables PPPoE keepalive.
idle <time> Sets PPPoE idle time.
type <auth-typ
e> Sets PPPoE authentication type.