Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 266)

252 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
server <sidx> <ip> Sets the Kerberos server
<sidx> (1-primary,
2-backup, or 3-remote) to
KDC IP address.
port <sidx> <port> Sets the Kerberos port to
<port> (KDC port) for
server <ksidx>
(1-primary, 2-backup, or
3-remote).
Note: EAP parameters
are only in affect if "eap"
is specified for the
authentication method
(set auth <type>).
eap server <sidx> <ip> Sets the radius server
(1-primary or as
2-secondary) IP address
<ip>.
port <sidx> <port> Sets the radius server
<sidx> (1-primary or
2-secondary) <port>
(1-65535).
secret <sidx> <secret> Sets the EAP shared
secret <secret> (1-63
characters) for server
<sidx> (1-primary or
2-secondary).
reauth mode <mode> Enables or disables EAP
reauthentication.
period <time> Sets the reauthentication
period <period> in
seconds (30-9999).
retry <number> Sets the maximum
number of
reauthentication retries
<retry> (1-99).
accounting mode <mode> Enable or disable Radius
accounting.
server <ip> Set external Radius
server IP address.
port <port> Set external Radius
server port number.