Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 365)

Brocade Mobility 5181 Access Point Product Reference Guide 351
53-1002516-01
Statistics Commands
8
For information on displaying WAN port statistics using the applet (GUI), see “Viewing WAN
statistics” on page 177.
For information on displaying LAN port statistics using the applet (GUI), see “Viewing LAN statistics”
on page 180.
For information on displaying Wireless statistics using the applet (GUI), see “Viewing wireless
statistics” on page 183.
For information on displaying individual WLAN statistics using the applet (GUI), see “Viewing WLAN
statistics” on page 185.
For information on displaying Radio statistics using the applet (GUI), see “Viewing radio statistics
summary” on page 187.
For information on displaying Client statistics using the applet (GUI), see “Viewing client statistics
summary” on page 191.
For information on displaying Mesh statistics using the applet (GUI), see “Viewing the mesh
statistics summary” on page 195.
For information on displaying Known AP statistics using the applet (GUI), see “Viewing known
access point statistics” on page 196.
BR5181>admin(stats)> send-cfg-ap
Description
Copies the Mobility 5181 Access Point’s configuration to another Mobility 5181 Access Point within
the known AP table.
Syntax
Example
admin(stats)>send-cfg-ap 2
admin(stats)>
s-Client Displays status and statistics for an individual Client.
auth-Client Displays single Client Authentication statistics.
wlap Displays Wireless Bridge Statistics statistics summary.
s-wlap Displays single Wirless Bridge statistics.
known-ap Displays a Known AP summary.
cpu-mem Displays memory and CPU usage statistics.
send-cfg-ap <idx> Copies the Mobility 5181 Access Point’s configuration to the Mobility 5181 Access Points
within the known AP table. Mesh configuration attributes do not get copied using this
command and must be configured manually.