Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 371)

Brocade Mobility 5181 Access Point Product Reference Guide 357
53-1002516-01
Statistics Commands
8
Packet Data (in HEX) : 55
admin(stats.ping)>
For information on Known AP tests using the applet (GUI), see “Pinging individual clients” on
page 194.
BR5181>admin.stats.ping)> set
Description
Defines the parameters of the ping test.
Syntax
Example
admin(stats.ping)>set station 00A0F843AABB
admin(stats.ping)>set request 10
admin(stats.ping)>set length 100
admin(stats.ping)>set data 1
admin(stats.ping)>
For information on Known AP tests using the applet (GUI), see “Pinging individual clients” on
page 194.
BR5181>admin.stats.echo)> start
Description
Initiates the ping test.
Syntax
Example
admin(stats.ping)>start
admin(stats.ping)>list
Station Address : 00A0F843AABB
Number of Pings : 10
Packet Length : 100
set station Defines the AP target MAC address.
request Sets number of ping packets to transmit (1-539).
length Determines ping packet length in bytes (1-539).
data Defines the particular packet data.
start Initiates the ping test.