Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 309)

Brocade Mobility 5181 Access Point Product Reference Guide 295
53-1002516-01
System Commands
8
BR5181>admin(system)>set
Description
Sets Mobility 5181 Access Point system parameters.
Syntax
For information on configuring System Settings using the applet (GUI), see “Configuring system
settings” on page 45.
BR5181>admin(system)>lastpw
Description
Displays last expired debug password.
Example
admin(system)>lastpw
BR5181 MAC Address is 00:15:70:02:7A:66
Last debug password was brocade
Current debug password used 0 times, valid 4 more time(s)
admin(system)>
BR5181>admin(system)>arp
Description
Dispalys the access point’s arp table.
Example
admin(system)>arp
Address HWtype HWaddress Flags
Mask Iface
157.235.92.210 ether 00:11:25:14:61:A8 C ixp1
157.235.92.179 ether 00:14:22:F3:D7:39 C ixp1
157.235.92.248 ether 00:11:25:B2:09:60 C ixp1
157.235.92.180 ether 00:0D:60:D0:06:90 C ixp1
set name <name> Sets the Mobility 5181 Access Point system name to <name> (1 to 59
characters). The access point does not allow intermediate space characters
between characters within the system name. For example, “BR5181 sales”
must be changed to “BR5181sales” to be a valid system name.
loc <loc> Sets the Mobility 5181 Access Point system location to <loc> (1 to 59
characters).
email <email> Sets the Mobility 5181 Access Point admin email address to <email> (1 to 59
characters).
cc <code> Sets the Mobility 5181 Access Point country code using two-letters <code>.