Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 257)

Brocade Mobility 5181 Access Point Product Reference Guide 243
53-1002516-01
Network Commands
8
Example
admin(network.wireless.wlan.create)>show wlan
ESS Identifier :
WLAN Name :
802.11a Radio : available
802.11b/g Radio : not available
Client Bridge Mesh Backhaul : not available
Hotspot : not available
Maximum Clients : 127
Client Idle Timeout : 30
Security Policy : Default
Client Access Control :
Kerberos User Name : Default
Kerberos Password : ********
Disallow Client to Client Communication : disable
Use Secure Beacon : disable
Accept Broadcast ESSID : disable
QoS Policy : Default
admin(network.wireless.wlan.create)>show security
----------------------------------------------------------------------
Secu Policy Name Authen Encryption Associated WLANs
----------------------------------------------------------------------
1 Default Manual no encrypt Front Lobby
2 WEP Demo Manual WEP 64 2nd Floor
3 Open Manual no encrypt 1st Floor
WPA Countermeasure enable
admin(network.wireless.wlan.create)>show acl
----------------------------------------------------------------------
ACL Policy Name Associated WLANs
----------------------------------------------------------------------
1 Default Front Lobby
2 Admin 3rd Floor
3 Demo Room 5th Floor
admin(network.wireless.wlan.create)>show qos
----------------------------------------------------------------------
QOS Policy Name Associated WLANs
----------------------------------------------------------------------
1 Default Front Lobby
2 Voice Audio Dept
no-Client-Clie
nt <mode> Enables or disables Clients associated to the same WLAN to not
communicate with each other.
sbeacon <mode> Enables or disables the BR5181 from transmitting the ESSID in
the beacon.
bcast <mode> Enables or disables the Mobility 5181 Access Point from
accepting broadcast IDs from Clients. Broadcast IDs are
transmitted without security.
qos <name> Defines the index name representing the QoS policy used with
this WLAN.
add-w
lan Apply the changes to the modified WLAN and exit.