Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 291)

Brocade Mobility 5181 Access Point Product Reference Guide 277
53-1002516-01
Network Commands
8
BR5181>admin(network.wireless.rogue-ap)> set
Description
Defines the Mobility 5181 Access Point ACL rogue AP method.
Syntax
Example
admin(network.wireless.rogue-ap)>
admin(network.wireless.rogue-ap)>set Client-scan enable
admin(network.wireless.rogue-ap)>set interval 10
admin(network.wireless.rogue-ap)>set on-channel disable
admin(network.wireless.rogue-ap)>set detector-scan disable
admin(network.wireless.rogue-ap)>set ABG-scan disable
admin(network.wireless.rogue-ap)>set brocade-ap enable
admin(network.wireless.rogue-ap)>set applst-ageout 10
admin(network.wireless.rogue-ap)>set roglst-ageout 10
admin(network.wireless.rogue-ap)>show
Client Scan : enable
Client Scan Interval : 10 minutes
On Channel : disable
Detector Radio Scan : disable
Auto Authorize Brocade APs : enable
Approved AP age out : 10 minutes
Rogue AP age out : 10 minutes
For information on configuring the Rogue AP options available to the access point using the applet
(GUI), see
“Configuring rogue AP detection” on page 162.
BR5181>admin(network.wireless.rogue-ap.Client-scan)>
Description
Displays the Rogue-AP Client-scan submenu.
set Client-scan <mode> Enables or disables to permit Clients to scan for rogue APs.
interval <minutes> Define an interval for associated Clients to beacon in attempting to locate
rogue APs. Value not available unless Client-scan is enabled.
on-channel <mode> Enables or disables on-channel detection.
detector-scan <mode> Enables or disables AP detector scan (dual-radio model only).
ABG-scan <mode> Enables or disables A/BG Detector Scan Mode.
brocade-ap <mode> Enables or disables the Authorize Any AP with a Brocade MAC range.
applst-ageout <minutes> Sets the approved AP age out time.
roglst-ageout <minutes> Sets the rogue AP age out time.