Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 275)

Brocade Mobility 5181 Access Point Product Reference Guide 261
53-1002516-01
Network Commands
8
RF Band of Operation : 802.11a (5 GHz)
RF Function : WLAN
Wireless Mesh Configuration:
Base Bridge Mode : enable
Max Wireless AP Clients : 5
Client Bridge Mode : disable
Client Bridge WLAN : WLAN1
Mesh Connection Timeout : enable
Dot11 Auth Algorithm : open-system-only
For information on configuring the Radio Configuration options available to the access point using
the applet (GUI), see
“Setting the WLAN’s radio configuration” on page 118.
BR5181>admin(network.wireless.radio)> set
Description
Enables an Mobility 5181 Access Point Radio and defines the RF band of operation.
Syntax
Example
admin(network.wireless.radio)>set 11a disable
admin(network.wireless.radio)>set 11bg enable
admin(network.wireless.radio)>set rf-function 1 wlan
admin(network.wireless.radio)>set mesh-base enable
admin(network.wireless.radio)>set mesh-max 11
admin(network.wireless.radio)>set mesh-client disable
admin(network.wireless.radio)>set mesh-timeout 1 45
admin(network.wireless.radio)>set mesh-wlan wlan1
admin(network.wireless.radio)>set dot11-auth shared-key-allowed
admin(network.wireless.radio)>show
Radio Configuration
set 11a <mode> Enables or disables the Mobility 5181 Access Point’s
802.11a radio.
11bg <mode> Enables or disables the Mobility 5181 Access Point’s
802.11b/g radio.
rf-function <mode> Sets the WLAN or WIPS sensor mode for the specifiec
radio index <idx>.
mesh-base <mode> Enables or disables base bridge mode.
mesh-max Sets the maximum number of wireless bridge clients.
mesh-client <mode> Enables or Disables client bridge mode.
mesh-timeout <period> Sets the client bridge link timeout for the radio index..
mesh-wlan <name> Defines the client bridge WLAN name.
dot11-auth <auth-algorithm> Defines dot11 level authentication algorithm to either
open-system-only ot shared-key-allowed.