Br5181>admin.stats.echo)>set, Br5181>admin.stats.echo)> start, Br5181>admin(stats)> ping – Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 369
Brocade Mobility 5181 Access Point Product Reference Guide
355
53-1002516-01
Statistics Commands
8
BR5181>admin.stats.echo)>set
Description
Defines the parameters of the echo test.
Syntax
For information on Client Echo and Ping tests using the applet (GUI), see
BR5181>admin.stats.echo)> start
Description
Initiates the echo test.
Syntax
Example
admin(stats.echo)>start
admin(stats.echo)>list
Station Address
: 00A0F843AABB
Number of Pings
: 10
Packet Length
: 100
Packet Data (in HEX)
: 1
Number of Client Responses
: 2
For information on Client Echo and Ping tests using the applet (GUI), see
BR5181>admin(stats)> ping
Description
Defines the ping test values used to conduct a ping test to an AP with the same ESSID.
set
station
<mac>
Defines Client target MAC address.
request
<num>
Sets number of echo packets to transmit (1-539).
length
<num>
Determines echo packet length in bytes (1-539).
data
<hex>
Defines the particular packet data.
start
Initiates the echo test.