Br5181>admin(network.wan.nat), Br5181>admin(network.wan.nat)> show, Network wan nat commands – Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 238
224
Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
Network WAN NAT Commands
BR5181>admin(network.wan.nat)>
Description
Displays the NAT submenu. The items available under this command are shown below.
For an overview of the NAT configuration options available using the applet (GUI), see
“Configuring Network Address Translation (NAT) settings”
BR5181>admin(network.wan.nat)> show
Description
Displays Mobility 5181 Access Point NAT parameters.
Syntax
Example
admin(network.wan.nat)>show 2
WAN IP Mode
: enable
WAN IP Address
: 157.235.91.2
NAT Type
: 1-to-many
Inbound Mappings
: Port Forwarding
unspecified port forwarding mode
: enable
unspecified port fwd. ip address
: 111.223.222.1
show
Displays the Mobility 5181 Access Point’s current NAT parameters for the specified index.
set
Defines the Mobility 5181 Access Point NAT settings.
add
Adds NAT entries.
delete
Deletes NAT entries.
list
Lists NAT entries.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI.
show
<idx> <cr>
Displays Mobility 5181 Access Point NAT parameters for the specified NAT index.