Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 43
Brocade Mobility 5181 Access Point Product Reference Guide
29
53-1002516-01
Mounting a Mobility 5181 Access Point
2
1. Fit the edges of the V-shaped clamp parts into the slots on the flat side of the rectangular
plate.
2. Place the V-shaped bracket clamp parts around the pole and tighten the nuts just enough to
hold the bracket to the pole. (The bracket may need to be rotated around the pole during the
antenna alignment process).
3. Attach the square mounting plate to the bridge with the supplied screws.
4. Attach the Mobility 5181 Access Point and mounting plate to the bracket already fixed to the
pole.
5. Secure the Mobility 5181 Access Point to the pole bracket using the provided nuts.
NOTE
The Mobility 5181 Access Point tilt angle may need to be adjusted during the antenna alignment
process. Verify the antenna polarization angle when installing, ensure the antennas are oriented
correctly in respect to the Mobility 5181 Access Point's coverage area.
6. Attach the radio antenna to their correct connectors.
7. Cable the Mobility 5181 Access Point using either the Mobility 5181 Access Point Power Tap
(Part No. BR-APPSBIAS518101R).
Fit the edges of the
V-shaped part into the slots
Tighten the
securing bolts
Attach the square
plate to the bridge