Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 262)

248 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Network Commands
8
BR5181>admin(network.wireless.wlan.hotspot.radius)> show
Description
Shows Radius hotspot server details.
Syntax
Example
admin(network.wireless.wlan.hotspot.radius)>show radius 1
WLAN 1
Hotspot Mode : enable
Primary Server Ip adr : 157.235.12.12
Primary Server Port : 1812
Primary Server Secret : ******
Secondary Server Ip adr : 0.0.0.0
Secondary Server Port : 1812
Accounting Mode : enable
Accounting Server Ip adr : 157.235.15.16
Accounting Server Port : 1813
Accounting Server Secret : ******
Accounting Timeout : 10
Accounting Retry-count : 3
Session Timeout Mode : enable
admin(network.wireless.wlan.hotspot.radius)>
For information on configuring the Hotspot options available to the access point using the applet
(GUI), see
“Configuring WLAN hotspot support” on page 114.
BR5181>admin(network.wireless.wlan.hotspot)> white-list
Description
Goes to the hotspot white-list menu.
Syntax
Example
admin(network.wireless.wlan.hotspot.whitelist)>add rule 1 157.235.21.21
admin(network.wireless.wlan.hotspot.whitelist)>show white-rule 1
show radius <idx> Displays Radius hotspot server details per index (1-16)
white-list add <rule> Adds hotspot whitelist rules by index (1-16) for specified IP address.
clear Clears hotspot whitelist rules for specified index (1-16).
show Shows hotspot whitelist rules for specified index (1-16).
save Saves the updated hotspot configuration to flash memory.
quit Quits the CLI session.
.. Goes to the parent menu.
/ Goes to the root menu.