Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 233)

Brocade Mobility 5181 Access Point Product Reference Guide 219
53-1002516-01
Network Commands
8
Syntax
Example
admin(network.lan.type-filter)>set mode 1 allow
For information on configuring the type filter settings using the applet (GUI), see “Setting the type
filter configuration” on page 100.
BR5181>admin(network.lan.type-filter)> add
Description
Adds an Ethernet Type Filter entry.
Syntax
Example
admin(network.lan.type-filter)>
admin(network.wireless.type-filter)>add 1 8137
admin(network.wireless.type-filter)>add 2 0806
admin(network.wireless.type-filter)>show 1
Ethernet Type Filter mode : allow
-----------------------------------------------------------------------------
index ethernet type
-----------------------------------------------------------------------------
1 8137
2 0806
3 0800
4 8782
For information on configuring the type filter settings using the applet (GUI), see “Setting the type
filter configuration” on page 100.
BR5181>admin(network.lan.type-filter)> delete
Description
Removes an Ethernet Type Filter entry individually or the entire Type Filter list.
Syntax
set mode <LAN-idx> <filter mode>
allow/deny Allows or denies the Mobility 5181 Access Point from processing a
specified Ethernet data type for the specified LAN.
add <LAN-idx> <type> Adds entered Ethernet Type to list of data types either allowed or denied Mobility 5181
Access Point processing permissions for the specified LAN (either LAN1 or LAN2).
delete <LAN-idx> <entry-idx> Deletes the specified Ethernet Type entry index (1 through 16).
<LAN-idx> all Deletes all Ethernet entries currently in list.