Br5181>admin(network.wireless.client-locationing), Network client locationing commands – Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) User Manual
Page 297
Brocade Mobility 5181 Access Point Product Reference Guide
283
53-1002516-01
Network Commands
8
Network Client Locationing Commands
BR5181>admin(network.wireless.Client-locationing)>
Description
Displays the Client Locationing submenu. The items available under this command include:
BR5181>admin(network.wireless.Client-locationing> show
Description
Displays the Client probe table configuration
Syntax
Example
admin(network.wireless.Client-locationing)>show
Client Probe Table Mode
: disable
Client Probe Table Size
: 200
admin(network.wireless.Client-locationing)>
BR5181>admin(network.wireless.Client-locationing> set
Description
Defines the Client probe table configuration used for locating Clients.
Syntax
show
Displays the current Client Locationing configuration.
set
Defines Client Locationing parameters.
..
Goes to the parent menu.
/
Goes to the root menu.
save
Saves the configuration to system flash.
quit
Quits the CLI.
show
Displays the Client probe table configuration.
set
Defines the Client probe table configuration.
mode
Enables/disables a Client probe scan for the purposes of Client locationing.
size
Defines the number of Clients in the table (the maximum allowed is 200).