Brocade Mobility 5181 Access Point Product Reference Guide (Supporting software release 4.4.0.0) - Manual (Page 84)

70 Brocade Mobility 5181 Access Point Product Reference Guide
53-1002516-01
Configuring SNMP settings
4
Use the SNMP Traps Configuration screen to enable traps and to configure appropriate settings for
reporting this information. Trap configuration depends on the network machine that receives the
generated traps. SNMP v1/v2c and v3 trap configurations function independently. In a mixed
SNMP environment, generated traps can be sent using configurations for both SNMP v1/v2c and
v3.
To configure SNMP traps on the Mobility 5181 Access Point:
1. Select System Configuration - > SNMP Access - > SNMP Trap Configuration from the Mobility
5181 Access Point menu tree.
2. Configure the SNMP v1/v2c Trap Configuration field (if SNMP v1/v2c Traps are used) to modify
the following:
Add Click Add to create a new SNMP v1/v2c Trap Configuration entry.
Delete Click Delete to remove a selected SNMP v1/v2c Trap Configuration entry.
Destination IP Specify a numerical (non DNS name) destination IP address for receiving
the traps sent by the Mobility 5181 Access Point SNMP agent.
Port Specify a destination User Datagram Protocol (UDP) port for receiving traps.
The default is 162.