Fire-Lite MS-10UD Series FACP User Manual

Page 65

Advertising
background image

MS-5UD & MS-10UD Series Manual — P/N 52626:C4 3/7/2014

65

Master Programming Level

Programming

Pressing 2 while viewing the Adjective/Noun Screen will cause the following screen(s) to be dis-
played. Note that the keyboard down arrow key must be pressed to see all the Noun screens. Press
the number corresponding to the noun that is to be used as a descriptor for the location of the detec-
tor currently being programmed. When a noun has been selected, it will appear at the top of the
display as indicated by the asterisks.

Pressing 3 or 4 while viewing the Adjective/Noun Screen will display screens similar to the previ-
ous Adjective and Noun Screens. The new screens will list custom Adjectives and Nouns which
have been programmed into the control panel by the user utilizing the PK-CD programming kit.
These descriptors are selected as described in the previous sections.

Description

The Description selection allows the programmer to enter additional information about the zone
currently being programmed. This information will be displayed as part of the device label on the
display. Pressing 2 while viewing Edit Input Zone Screen #4 will cause the following screen to be
displayed:

A flashing cursor will appear at the first asterisk to the left. The programmer can enter additional
descriptive information about the device being programmed. This information will appear on the
display along with the standard device label information.

A maximum of 20 characters (including spaces) can be entered. To enter alphanumeric characters
from the keypad, repeatedly press the appropriate key until the desired character is displayed in the
first position. For example, to enter the letter B, press the 2 (ABC) key three times to toggle
through the characters 1, A, and B. Press the right arrow key to move the cursor one position to the
right and repeat the process to enter the next character. To enter a space, press the * (QZ) key four
times until a blank appears in the desired position. When all characters have been entered, press the
Enter key to store the information. The display will return to the Edit Input Zone Screen #4, dis-
playing the new information at the bottom of the screen.

Recall/Increment Function

In addition, the user may use the Recall/Increment function at any time when the cursor is on the
first letter of the Description, Adjective or Noun field as follows:

If the zero key is pressed, a 0 is placed in the first letter position

1=STANDARD ADJECTIVE

2=STANDARD NOUN

3=CUSTOM ADJECTIVE

4=CUSTOM NOUN

Adjective/Noun Screen


1=BASEMENT

2=BOILER RM

3=CLASSROOM

Noun Screen #1


1=CLOSET

2=CORRIDOR

3=ELECTRIC RM

Noun Screen #3


1=ELEVATOR

2=ENTRANCE

3=FLOOR

Noun Screen #5


1=GARAGE

2=HALLWAY

3=HVAC RM

Noun Screen #7


1=KITCHEN

2=LOBBY

3=OFFICE

Noun Screen #2


1=STAIRWAY

2=STOREROOM

3=WING

Noun Screen #6


1=PATIENT

2=RESTROOM

3=ROOM

Noun Screen #4


1=ZONE

Noun Screen #8

1=STANDARD ADJECTIVE

2=STANDARD NOUN

3=CUSTOM ADJECTIVE

4=CUSTOM NOUN

Adjective/Noun Screen

INPUT ZONE #

1=ADJECTIVE/NOUN

2=DESCRIPTION

Edit Input Zone Screen #4

ZONE # DESCRIPTION

PRESS ENTER IF DONE


Adjective/Noun Screen

Advertising
This manual is related to the following products: