Rosa cable 10 m (analog outputs), Table 30, Rosa cable 10 m (231425sp) – Vaisala WMT700 User Manual
Page 102
User's Guide ______________________________________________________________________
ROSA Cable 10 m (Analog Outputs)
The ROSA Cable 10 m (231425SP) is intended for replacing
WS425 with WMT700 in the Vaisala ROSA system in case the
WS425 has been connected using analog outputs. Table 30 below
shows the wire colors and related signals on WMT700.
Note that there are serial port signals available for configuration
purposes on the cable even though they are not used as
operational. The unused wires must be properly isolated and
terminated to avoid unwanted operation or failure.
Table 30
ROSA Cable 10 m (231425SP)
Power Supply
Wire Colors Pin
Operating Power Supply
White
1
Operating Power Supply Ground
Gray-Pink
11
Heater Power Supply
Gray
5
Heater Power Supply
Pink
6
Heater Power Supply Ground
Blue
7
Heater Power Supply Ground
Red
8
Enclosure Ground
Shield
Shield
Analog Outputs
Analog Output AOUT2, Wind Direction
Brown
2
Analog Output AOUT1, Wind Speed
White-Green 13
Reference Input for AOUT2 (simulated potentiometer) White-Gray
17
Analog Output Ground
Red-Blue
12
COM port
RS-232
RS-485
COM2
RS232Rx
Rx-
Green
3
RS232Tx
Tx-
Yellow
4
-
Tx+
Brown-Green 14
-
Rx+
White-Yellow 15
COM1 and COM2 Communication Ports Ground
Violet
10
COM1
(service port)
RS-485, -
Black
9
RS-485, +
Brown-
Yellow
16
100 __________________________________________________________________ M211095EN-E