Installation procedure, Unpacking, Figure 22 – Vaisala WMT700 User Manual
Page 64: Sensor handling, Caution
User's Guide ______________________________________________________________________
Installation Procedure
At the measurement site, you need to mount, align, and connect
WMT700 to the power source and data acquisition system.
You can install the optional bird cage after the wind sensor is
mounted and the transportation damper is removed from the
sensor. For instructions, see section Installing Bird Cage on page
75.
CAUTION
When handling WMT700, do not rotate, pull, strike, bend, scrape, or
touch the transducers with sharp objects. Any impact on the wind sensor
array may damage the device.
1005-004
Figure 22
Sensor Handling
Unpacking
NOTE
Save the container and all the packaging materials for future
transportation or shipping.
WMT700 is shipped in a cardboard custom container with plastic
transportation dampers. One of the dampers protects the wind
sensor body, while the other shields the array and the transducers,
as shown in Figure 23 on page 63.
62 ___________________________________________________________________ M211095EN-E