Vaisala WMT700 - Manual (Page 31)

Chapter 2 ___________________________________________________________ Product Overview
Manual
Ordering option 13, Manual, defines available manual version and
possible special package design.
Table 16 Manual
Option Manual
1 No manual
2 English manual
3 Japanese manual
4 Chinese manual
5 Russian manual
6 Deif manual and packing
Example of WMT703 Configuration
WMT703 C4A2A003B1A2
| | | | | | | | | | | | |_English manual included
| | | | | | | | | | | |__No accessories
| | | | | | | | | | |___Option 11 not in use
| | | | | | | | | | ____FIX70 mounting adapter included
| | | | | | | | |_____Cable 10m included
| | | | | | | |______Analog signal for wind direction disabled
| | | | | | |_______ Analog signal for wind speed disabled
| | | | | |________ Used unit: m/s
| | | | |__________WS425 NMEA Extended messaging in use
| | | |___________Physical serial line interface is RS-485
| | |____________Transducers, arms, and body are heated
| |______________-55 to +70° temperature range model
|________________WMT703 measurement range up to 75 m/s
NOTE Vaisala recommends using heated versions of WMT700 in
environmental conditions where snow and ice build-up is possible.
For more information on the heating functionality, see section Heating on
page 82.
NOTE If required, you can change the digital communication interface, digital
communication profile, digital communication units, analog output
signals for wind speed channel, and analog output signals for wind
direction channel. To change the product version characteristics listed in
Table 9 on page 25, contact Vaisala Service Center.
VAISALA ________________________________________________________________________ 29