Appendix a, Complete command set for wmt700, Table 63 – Vaisala WMT700 User Manual
Page 197: Command set for all profiles, The commands available for wmt700
Appendix A __________________________________________ Complete Command Set for WMT700
APPENDIX A
COMPLETE COMMAND SET FOR
WMT700
Table 63 below lists all the commands available for WMT700.
Table 63
Command Set for All Profiles
Configuration Mode/
Measurement Mode and
Profile
Command
Description
Configuration mode
?
Displays a list of configuration commands.
Configuration mode
BAUD
Changes or displays serial port settings.
Configuration mode
CLEARERR
Resets error counters.
Configuration mode
CLOSE
Switches the serial port to measurement mode.
Configuration mode
ERRORS
Displays error codes and counts.
Configuration mode
G
Displays either all or specified parameters.
Configuration mode
H
Displays list of data messages and available values for
measurement unit, profile, baud rate, interface, and
analog output mode.
Configuration mode
MEAS
Starts wind measurement based on the user-
configurable averaging time. WMT700 does not send
data messages automatically.
Configuration mode
POLL
Tests data polling.
Configuration mode
RESET
Resets WMT700.
Configuration mode
S
Changes selected parameters or defines new data
messages.
Configuration mode
START
Starts continuous measurement.
Configuration mode
STOP
Stops continuous measurement.
Configuration mode
VERSION
Displays the software version.
Configuration mode
WIND_GET
Fetches wind calibration information.
Measurement Mode
WMT700 profile
MEAS
Starts wind measurement. The duration of the
measurement is based on the user-configurable
averaging time.
Measurement mode
WMT700 profile
OPEN
Switches the serial port to configuration mode.
Measurement mode
WMT700 profile
POLL
Fetches data from WMT700.
Measurement mode
WMT700 profile
SLEEP
Switches WMT700 from normal operating mode to low-
power mode.
Measurement Mode
MES12 profile
@a M 12
Polls data from WMT700 in the MES12 data message
format.
Measurement mode
WS425 ASOS F/G profile
WA
Requests average wind speed and direction message.
Measurement mode
WS425 ASOS F/G profile
WS
Requests the verbose Built-In Test (BIT) results.
VAISALA _______________________________________________________________________ 195