Vaisala WMT700 - Manual (Page 106)

User's Guide ______________________________________________________________________
Differences between WMT700 and
WS425 Analog Output Signals
WMT700 pin connections differ from the connections of WS425
in that wind speed signal output, both voltage and frequency
signals, appears on WMT700 pin 13.
NOTE WMT700 analog outputs must be configured according to the appropriate
analog output mode, which is either voltage, frequency, or potentiometer.
Table 34 below lists the analog output connections for WMT700
and WS425 connector pins.
Table 34 Analog Output Connections
WMT700
Connector
Pin WMT700 Signal
Description Voltage Output WS425 Connector Pin,
Wire Color
13 Analog Output
AOUT1, Wind
Speed Voltage 15, Violet (connect pin 14
to ground)
Current not available
Frequency 14, Pink
2 Analog Output
AOUT2, Wind
Direction Voltage 13, Gray
Current not available
Potentiometer 13, Gray
17 Reference Input
for AOUT2 Potentiometer 12, White
12 Analog Output
Ground All modes 1, Black (common with
supply ground)
104 __________________________________________________________________ M211095EN-E