Allied Telesis AT-S63 - Manual (Page 119)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section II: Advanced Operations 119
Configuring Syslog Output Definitions
To create a syslog output definition for sending the event messages to a
syslog server on your network:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the System button.
3. Select the Event Log tab, shown in Figure 30 on page 108.
4. In the Configure Log Outputs section of the tab, click the Create button
to display the Create Log Output page in Figure 34.
Figure 34. Create Event Log Output Page
5. Configure the parameters in Table 18 as needed.
Table 18. Syslog Output Definition Parameters
Parameter Definition
Output ID Specifies a unique identification number
for the syslog output definition. The range
is 2 to 20. The default is the next available
number.