Allied Telesis AT-S63 - Manual (Page 148)

Chapter 11: SNMPv3
148 Section III: SNMPv3
Read View Name The value that you configured with the View Name parameter
in the SNMPv3 View Table. A Read View Name allows the
users assigned to this Group Name to view the information
specified by the View Table entry. This value does not need to
be unique.
Write View Name The value that you configured with the View Name parameter
in the SNMPv3 View Table.
A Write View Name allows the users assigned to this Security
Group to write, or modify, the information in the specified View
Table. This value does not need to be unique.
Notify View Name The value that you configured with the View Name parameter
in the SNMPv3 View Table.
A Notify View Name allows the users assigned to this Group
Name to send traps permitted in the specified View. This value
does not need to be unique.
Security Model The possible values are:
Select one of the following SNMP protocols as the Security
Model for this Group Name.
1-v1 - Select this value to associate the Group Name with the
SNMPv1 protocol.
2-v2c - Select this value to associate the Group Name with the
SNMPv2c protocol.
3-v3 - Select this value to associate the Group Name with the
SNMPv3 protocol. The SNMPv3 protocol allows you to
configure the group to authenticate SNMPv3 entities (users)
and encrypt messages.
Security Level The possible values are:
No Authentication/Privacy - This option represents no
authentication and no privacy protocol. Select this security
level if you do not want to authenticate SNMP entities and you
do not want to encrypt messages using a privacy protocol. This
security level provides the least security.
Table 24. SNMPv3 Access Table Parameters
Parameter Description