Allied Telesis AT-S63 - Manual (Page 233)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section VI: Port Security 233
7. To configure the parameters of the authenticator ports on the other
switches in the stack, repeat this procedure starting with step 3.
8. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.
Guest VLAN Specifies the VID of a Guest VLAN. The
authenticator port is a member of a Guest
VLAN when no supplicant is logged on.
Clients do not log on to access a Guest
VLAN. You can specify a Guest VLAN by
either its name or VID. To remove a Guest
VLAN without assigning a new one, delete
the name or VID of the assigned VLAN.
Table 41. 802.1 Authenticator Port Parameters
Parameter Definition