Deleting snmpv1 and snmpv2c community strings – Allied Telesis AT-S63 User Manual
Page 59
AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section I: Basic Operations
59
Deleting SNMPv1 and SNMPv2c Community Strings
To delete an SNMPv1 and SNMPv2c community string:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button.
3. Select the SNMP tab, shown in Figure 11 on page 52.
4. In the SNMPv1 & SNMPv2c section, click the Configure button to
display the SNMPv1 & SNMPv2c Communities tab, shown in Figure
12 on page 54.
5. Click the radio button of the community name you want to delete and
click the Remove button. You can delete only one community string at
a time.
A warning message is displayed.
6. Click the OK button to delete the community string from the switch.
7. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.