Figure 1: general tab – Allied Telesis AT-S63 User Manual
Page 22
Advertising
Chapter 1: Basic Switch Parameters
22
Section I: Basic Operations
Configuring the Stack’s Name, Location, and Contact
This procedure assigns a name to the switch. The name appears at the
top of the web browser windows. Names can help you identify your
switches when you manage them and avoid performing a configuration
procedure on the wrong switch. This procedure also assigns the name of
the administrator responsible for maintaining the unit and the location of
the switch.
To assign a name, location, and contact to a switch:
1. From the Home page, click the Configuration button.
2. Click the System button in the Configuration menu.
3. Click the General tab shown in Figure 1.
Figure 1. General Tab
Advertising