Allied Telesis AT-S63 - Manual (Page 45)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section I: Basic Operations 45
8. After entering the desired changes, click the Apply button.
9. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.
Unknown Unicast Rate
Limiting Use this parameter to enable or disable
unknown ingress unicast packet limits.
Possible settings are:
Enabled - Unknown unicast packet
ingress rate limiting is enabled. To set the
rate limit, use the Unknown Unicast Rate
parameter.
Disabled - Unknown unicast packet
ingress rate limiting is disabled. This is the
default.
Unknown Unicast Rate Use this parameter to set the unknown
unicast rate limit in packets per second.
The range is 0 to 262143. The default is
262143.
Multicast Rate Limiting Use this parameter to enable or disable
ingress multicast packet limits. Possible
settings are:
Enabled - Multicast packet ingress rate
limiting is enabled. To set the rate limit,
use the Multicast Rate parameter.
Disabled - Multicast packet ingress rate
limiting is disabled. This is the default.
Multicast Rate Use this parameter to set the multicast
rate limit in packets per second. The
range is 0 to 262143. The default is
262143.
Table 5. Port Configuration Window
Parameter Definition