Allied Telesis AT-S63 - Manual (Page 180)

Chapter 11: SNMPv3
180 Section III: SNMPv3
Displaying the
Target
Parameters Table
Entries
To display the entries in the SNMPv3 Target Parameters Table:
1. From the Home page, click the Monitoring button.
2. From the Monitoring menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 52.
3. In the SNMPv3 section, click the radio button for View Target
Parameters Table and the View button to display the SNMPv3 Target
Parameters Table tab in Figure 68. The parameters that define target
parameters table entries are described in Table 28 on page 166.
Figure 68. SNMPv3 Target Parameters Table Tab (Monitoring)