Allied Telesis AT-S63 - Manual (Page 139)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section III: SNMPv3 139
Deleting a User
Table Entry
To delete an entry from the SNMPv3 User Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 52.
3. In the SNMPv3 section, click the radio button next to Configure User
Table and then click Configure to display the SNMPv3 User Table tab
in Figure 38 on page 136.
4. Click the radio button of the User Table entry you want to delete and
click the Remove button.
5. At the confirmation prompt, click the OK button.
6. To save your changes in the master configuration file, click the Save
Config button.
Modifying a User
Table Entry
To modify an entry in the SNMPv3 User Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 52.
3. In the SNMPv3 section, click the radio button for Configure User
Table and then the Configure button to display the SNMPv3 User
Table tab in Figure 38 on page 136.
4. Click the radio button of the SNMPv3 user entry you want to change
and then click the Modify button. An example of the Modify SNMPv3
User window is shown in Figure 40.