Allied Telesis AT-S63 - Manual (Page 141)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section III: SNMPv3 141
Configuring the SNMPv3 View Table
To create, delete, or modify SNMPv3 View Table entries, refer to the
following procedures:
ˆ “Creating a View Table Entry” on page 141
ˆ “Deleting a View Table Entry” on page 144
ˆ “Modifying a View Table Entry” on page 144
Creating a View
Table Entry
To create an entry in the SNMPv3 View Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 52.
3. In the SNMPv3 section, click the radio button for Configure View
Table and then click the Configure to display the SNMPv3 View Table
tab Figure 41.
Figure 41. SNMPv3 View Table Tab
4. Click the Add button to display the Add New SNMPv3 View page in
Figure 42.