Allied Telesis AT-S63 - Manual (Page 215)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Secton V: Virtual LANs 215
Note
Stacks do not use the Type or Protocol parameter.
5. Click the VID field and enter an ID number for the VLAN. The range is
2 to 4096. The default is the next available VID number in the stack.
6. Click the Name field and enter a name of up to fifteen alphanumeric
characters for the new VLAN. To make the VLAN easy to identify,
select a name that reflects the function of the user’s of the VLAN (for
example, Sales or Accounting). Spaces and special characters, such
as asterisks (*), are not permitted.
7. Click the Apply button.
8. To add the ports of the VLAN, go to “Adding or Removing VLAN Ports”
on page 216.