Figure 20: add new trunk window, Table 11: port trunking tab – Allied Telesis AT-S63 User Manual
Page 75
AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section I: Basic Operations
75
The table lists the current static ports trunks in the stack. Table 11
describes the columns in the table.
4. To create a new static trunk, click the Add button to display the Add
New Trunk popup window in Figure 20.
Figure 20. Add New Trunk Window
Table 11. Port Trunking Tab
Column
Definition
ID
Displays the ID numbers of the trunks.
Name
Displays the names of the trunks.
Type
Displays the load distribution methods.
The possible settings are:
SA - Source MAC address (Layer 2)
DA - Destination MAC address (Layer 2)
SA/DA - Source MAC address /
destination MAC address (Layer 2)
SI - Source IP address (Layer 3)
DI - Destination IP address (Layer 3)
SI/DI - Source IP address /destination IP
address (Layer 3)
Ports
Displays the ports of the trunks.