Creating the port mirror, Figure 23: port mirroring tab, Table 12: port mirroring tab – Allied Telesis AT-S63 User Manual
Page 83
Advertising
AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section I: Basic Features
83
Creating the Port Mirror
To configure the port mirror:
1. From the home page, click the Configuration button.
2. From the Configuration menu, click the Layer 1 button.
3. Click the Port Mirroring tab, shown in Figure 23.
Figure 23. Port Mirroring Tab
Table 12 describes the columns in the Port Mirroring table.
Table 12. Port Mirroring Tab
Column
Definition
Mirror to Port
Displays the destination port of the
mirrored traffic. A stack can have only one
destination port. A value of 0.0 (zero)
means there is no port mirror.
Ingress Ports
Displays the source ports of mirrored
ingress traffic.
Egress Ports
Displays the sources ports of mirrored
egress traffic.
Advertising