Configuring the snmpv3 target address table, Creating a target address table entry, Figure 53: snmpv3 target address table tab – Allied Telesis AT-S63 User Manual
Page 160
Chapter 11: SNMPv3
160
Section III: SNMPv3
Configuring the SNMPv3 Target Address Table
Here are the procedures for managing the SNMPv3 Target Address
Table:
“Creating a Target Address Table Entry” on page 160
“Deleting a Target Address Table Entry” on page 162
“Modifying a Target Address Table Entry” on page 163
Creating a Target
Address Table
Entry
To create an entry in the SNMPv3 Target Address Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 52.
3. In the SNMPv3 section, click the button next to the Configure Target
Address Table, and then click the Configure button to display the
SNMPv3 Target Address Table tab shown in Figure 53.
Figure 53. SNMPv3 Target Address Table Tab
4. Click the Add button to display the Add New SNMPv3 Target Address