Allied Telesis AT-S63 - Manual (Page 65)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section I: Basic Operations 65
The View Unicast MAC Addresses section and the View Multicast
MAC Addresses section display unicast and multicast addresses,
respectively. The options function the same in both sections. You can
select only one option at a time.
Table 9. View MAC Addresses Window
Selection Definition
View All Displays all dynamic and static unicast or
multicast addresses in the MAC address
table.
View Static Displays the static unicast or multicast
addresses assigned to the ports.
View Dynamic Displays the dynamic addresses learned
on the ports.
View MAC Addresses on
Port Displays the dynamic and static MAC
addresses of a particular port. You can
specify more than one port at a time.
View MAC Addresses for
VLAN Displays the static and dynamic
addresses learned on the tagged and
untagged ports of a VLAN. You specify
the VLAN by entering the VLAN ID
number. You can specify only one VLAN
at a time.
View MAC Address Displays the port number where a MAC
address was assigned or learned. In
some situations, you might want to know
which port learned a particular MAC
address. You could display the MAC
address table and scroll through the list
looking for the MAC address, but if the
switch is part of a large network, finding
the address could prove difficult. This
option allows you to specify the MAC
address and let the AT-S63 Management
Software automatically locate the port
where the address was learned.