Allied Telesis AT-S63 - Manual (Page 89)

AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section I: Basic Features 89
Disabling the Port Mirror
This procedure is used to disable port mirroring so that the stack stops
copying traffic from the source ports to the destination port. The
destination port, however, is still reserved for port mirroring. To resume
normal network operations on the destination port, refer to “Deleting the
Port Mirror” on page 90.
To disable the port mirror:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Layer 1 button.
3. Click the Port Mirroring tab, shown in Figure 23 on page 83.
4. Click the Modify button to display the pop-up.window in Figure 24 on
page 84.
5. Click the Enable Mirror checkbox to remove the check and click the
Apply button. The stack stops copying the traffic on the source ports to
the destination port.
6. To save your changes in the configuration file on the master switch,
click the Save Config button in the Configuration menu.