Figure 7: port configuration window – Allied Telesis AT-S63 User Manual
Page 39
AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section I: Basic Operations
39
.
Figure 7. Port Configuration Window
Note
The Port Configuration window in the figure above is from a 10/100/
1000 Mbps twisted pair port. The window for a fiber optic port will
contain a subset of the parameters.
If you are configuring multiple ports and the ports have different
settings, the Port Configuration page displays the settings of the lowest
numbered port you selected. After you have configured the settings of
the port, all of its settings, including those that were not changed, are
copied to the other selected ports.
The Defaults button at the bottom of the page returns the port settings
to the default values, which are found in Appendix A in the AT-S63
Management Software Features Guide.