Allied Telesis AT-S63 - Manual (Page 236)

Chapter 14: 802.1x Port-based Network Access Control
236 Section VI: Port Security
7. To configure the parameters of the supplicant ports on the other
switches in the stack, repeat this procedure starting with step 3.
8. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.
User Password Specifies the password for the switch port.
The port sends the password to the
authentication server for verification when
the port logs on to the network. The
password can be from 1 to 16
alphanumeric characters (A to Z, a to z, 1
to 9). Do not use spaces or special
characters, such as asterisks or
exclamation points. The password is case
sensitive.
Table 42. Supplicant Port Parameters
Parameter Definition