Allied Telesis AT-S63 - Manual (Page 146)

Chapter 11: SNMPv3
146 Section III: SNMPv3
Configuring the SNMPv3 Access Table
To create, delete, or modify SNMPv3 Access Table entries, refer to the
following procedures:
ˆ “Creating an Access Table” on page 146
ˆ “Deleting an Access Table Entry” on page 150
ˆ “Modifying an Access Table Entry” on page 150
Creating an
Access Table
To create an entry in the SNMPv3 Access Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 52.
3. In the SNMPv3 section, click the radio button for the Configure
Access Table and the click the Configure button to display the
SNMPv3 Access Table tab in Figure 44.
Figure 44. SNMPv3 Access Table Tab
4. To create an SNMPv3 Access Table entry, click the Add button to
display the Add New SNMPv3 Access window in Figure 45.