Figure 48 – Allied Telesis AT-S63 User Manual
Page 153
AT-S63 Web Browser User’s Guide for AT-9400 Stacks
Section III: SNMPv3
153
Figure 48. Add New SNMPv3 SecurityToGroup Page
5. Configure the parameters, described in Table 25, for the new entry and
click the Apply button.
Table 25. SNMPv3 Security to Group Table Parameters
Parameter
Description
Security Model
The corresponding SNMP protocol of the User Name. The
possible values are:
1-v1 - Select this value to associate the Group Name with the
SNMPv1 protocol.
2-v2c - Select this value to associate the Group Name with the
SNMPv2c protocol.
3-v3 - Select this value to associate the Group Name with the
SNMPv3 protocol.
Security Name
The Security Name that you want to associate with a group.
Enter a Security Name that you configured in “Configuring the
SNMPv3 User Table” on page 136.