Displaying static port trunks, Figure 22: port trunking tab (monitoring) – Allied Telesis AT-S63 User Manual
Page 80
Advertising
Chapter 5: Static Port Trunks
80
Section I: Basic Operations
Displaying Static Port Trunks
To display the port trunks in the stack:
1. From the Home page, click the Monitoring button.
2. From the Monitoring menu, click the Layer 1 button.
3. Click the Port Trunking tab, shown in Figure 22.
Figure 22. Port Trunking Tab (Monitoring)
The table is described in Table 11 on page 75.
Advertising