ETC Eos v1.3 - Manual (Page 104)

90 Eos Operations Manual
{Manual Control}
This desk setting button gives you access to Eos manual control settings.
Manual Time
In this section you may change the default times for manual changes to occur in live. Times can be
set for each parameter category (Intensity Up, Intensity Down, Focus, Color, and Beam). You may
use the [Thru] key to enter a value for all categories.
• {Int Up} [Thru] [9] [Enter]
The default for each of these is 0 seconds.
Manual Control
This section allows you to specify the values for certain buttons used in manual control. To change
any value, touch the appropriate button in the CIA and use the keypad to enter a new value.
Highlite - This feature will be available in a future release.
Level - This sets the level for the [Level] key. Any value between 0-100 may be entered.
The default is 100.
Plus % - This sets the level for the [+%] key, which will increase the selected channel by
the set percentage. Any value between 0-100 may be entered. The default is 10%.
Minus % - This sets the level for the [-%] key, which will decrease the selected channel by
the set percentage. Any value between 0-100 may be entered. The default is 10%.
Sneak Time
In this section you may change the default times for sneak commands to appear in live. Times can
be set for each parameter category (Intensity Up, Intensity Down, Focus, Color, and Beam). You
may use the [Thru] key to enter a value for all categories.
• {Int Up} [Thru] [9] [Enter]
The default for each of these is 5 seconds.