ETC Eos v1.3 - Manual (Page 299)

A
Eos Configuration Utility 285
Appendix A
Eos Configuration Utility
Overview
This appendix covers the Eos Configuration Utility (ECU) and
its use. This is a component of the Eos Lighting Control System
and is used for both system configuration and performing basic
level test functions. These instructions illustrate how to use the
utility, but do not specify what changes to make as these are
based on your preferences and can be changed to suit your
control needs.
What the Utility Does
Here is a brief list of some of the actions that can be performed from the ECU.
• Configure the IP address of the console
• Configure the services to provide IP addresses to other devices
• Configure the logical monitor placement to match the physical monitors
• Set the date, time and time zone
• Choose to boot the console in Master, Client, Backup or Offline mode
• Perform a simple button and encoder response test
• Calibrate the touchscreens
• Arrange the external monitors
• Update software
• Save log files