Apply an existing effect, Editing effects live, Stop an effect – ETC Eos v1.3 User Manual
Page 246: Editing effects live stop an effect
232
Eos Operations Manual
Apply an Existing Effect
Once an effect has been created, it will appear in the effects list. To apply an existing effect, press:
• [Select Channels] [Effect] [x] [Enter]
or using the direct selects
• [Select Channels] {Effect x}
The selected channels will begin their changes as programmed in the effect.
Editing Effects Live
To edit an effect while it is running, press:
• [Displays] {Effect Status}
The effect status display will open in the CIA and any currently running effects will be visible in the
display. Select the effect you want to edit live by pressing:
• [Effect] [x] [Enter]
Use the encoders to adjust the attributes as described in
Effect Status Display, page 223
Adjustments are cue overrides and don’t impact the core effect.
To edit other properties of the effect in live, press {Edit} and the effects editor will open (See
). Changes made in the editor will impact the effect itself and all instances in which
the effect is used.
Stop an effect
Pressing [Stop Effect] [Enter] will stop all running effects.
To stop a specific effect, press: [Stop Effect] [x] [Enter].
You may also stop effects on specific channels by [selecting channels] [Stop Effect] [Enter].
You may also remove an effect instruction by [selecting channels] [Effect] [At] [Enter]. This
command will work in live or blind