ETC Eos v1.3 - Manual (Page 55)

3
System Basics 41
Table View
Table view is available in live or blind. In live, table view displays all output channel data. In blind, it
shows one record target at a time. It shows a smaller range of channels on the vertical axis and
parameter data along the horizontal axis. Parameter categories are always visible in this format,
summarizing the category instruction. The categories can be expanded as needed to provide a
more detailed view of individual parameters, or they can remain suppressed.
To hide/reveal parameters of a certain category from view you may press and hold [Params] and
then press the parameter category button of the parameters you wish to affect. Parameters for that
category will be suppressed/expanded, depending on the current view. You cannot collapse a
category entirely.
To hide/reveal only certain parameters, press and hold [Params] and then press the parameter
buttons of the appropriate parameters in the CIA. The parameters will be displayed or suppressed
depending on the current view.
You will notice that when you hold down the [Params] button, the touchbuttons of parameters that
are currently selected for viewing will be highlighted in the CIA.
Expanded Category
Expanded Parameters
Collapsed Category
Channels Command
Line
Selected cue
information