Parked values in live, N o t e – ETC Eos v1.3 User Manual
Page 249
19
Using Park
235
Parked Values in Live
Channels and parameters may be parked and unparked from the live display. Following are some
examples:
To park a channel, parameter, or group from live:
• [2] [At] [5] [0] [Park] [Enter] - parks channel 2 intensity at 50%
• [2] [Intensity] [Park] [Enter] - parks the intensity of channel 2 at its current value
• [2] [Park] [Enter] - parks all parameters of channel 2 at their current settings
• [2] [At] [Park] [Enter] - if channel 2 is unparked, this command parks intensity at the current
value. If the intensity for channel 2 is parked, this command unparks intensity.
• [Group] [2] [At] [Park] [Park] [Enter] - pressing [Park] twice is a toggle state and allows you
to park a complete channel list that currently has some channel intensities parked and some
unparked.
• [2] [Color Palette] [8] [Park] [Enter] - parks the color for channel 2 in color palette 8.
• [2] [Color] [Park] [Enter] - parks channel 2 color at its current value.
• [Cue] [6] [Park] [Enter] - parks all the channels stored in cue 6 at their levels provided in the
cue.
• [Park] [Enter] - clears all parked channels and scaled park instructions (see
). When a channel is unparked, it reverts to the level the console is
currently providing, or its default value if there is no current instruction.
N o t e :
If a channel list is constructed in which some channels are parked and some are
unparked, [Park] [Enter] will unpark them all.